Use these spring action curved tip pliers for easy installation and removal of all plastic ball links. Ball links are the core connection style for all rods and links in remote control Helis. Properly installed and removed of ball links insure a smooth running setup which ultimately results in a smoother running helicopter.
- Spring action for easy grip
- Solid rubber grips
- Curved tip for easy access
Align 60A Brushless ESC(Governer Mode) RCE-BL60G
- Specifications:
- Continuous current: 60Amps with proper air flow
- Surge current: 70Amps
- Supporting motor types: 2~10 pole in/outrunner brushless motors
- Supporting maximum RPM: 2poles=>190,000rpm.6poles=>63,000rpm
- Supporting input voltage: 5.5V~25.2V
- Supporting battery types: Li-ion/ Li-poly 2~6 cells
- Output voltage: 5-6V step-less adjustment
- Continuous current 3A. Burst current 5A
- Size: 65x28x12mm
- Weight: 55g
- Accessories:
- ALIGN standard 4mm socket terminal x 3 pcs(Max. current 110A)
- Heat shrink tube x 3 pcs(F5x25mm)
Canomod One-way Bearing Removal Tool
Available for Trex 450 and Trex 600
Having a hard time getting the one way bearing out of a destroyed main gear. Well the CanoMod One Way Bearing removal tool is here to help. Simply position the upper cap onto of the one way bearing and the lower cap just below it and hammer the old one way bearing out. RC Helis are great, but even better when you have the right tools.
- 12x18x16mm For 600
- 6x10x12mm For 450
- Easy to use
- Very strong
T-Rex 600 Metal Head Stopper ( AGNH60005 / H60005 )
