This is the kit only package for the Trex 700 Nitro Helicopter.

The Trex 700 continues the legacy of the Align helicopters line up. Powering a 690 - 710mm blade setup the Trex 700 rules the sky. It has plenty of power to spare and delivers performance right out of the box. The Trex 700 has a torque tube driven tail system which makes it perfect for extreme 3D flying. If you are looking for an affordable high end 90 size helicopter, the Trex 700 is it.

The Trex 700 continues the legacy of the Trex 600. Powering a 690 - 710mm blade setup the Trex 700 rules the sky. It has plenty of power to spare and delivers performance right out of the box. The Trex 700 has a torque tube driven tail system which makes it perfect for extreme 3D flying. If you are looking for an affordable high end 90 size helicopter, the Trex 700 is it.

The Trex 700 continues the legacy of the Trex 600. Powering a 690 - 710mm blade setup the Trex 700 rules the sky. It has plenty of power to spare and delivers performance right out of the box. The Trex 700 has a torque tube driven tail system which makes it perfect for extreme 3D flying. If you are looking for an affordable high end 90 size helicopter, the Trex 700 is it.

The package options gives you the choice of this kit with the Align motor with the black head or the Align motor with the blue head.

The Trex 700 3G is the flybarless version of the popular .90 size Trex 700 with a flybarless unit installed. What sets this helicopter are part from the competition is the introduction of the first quality .90 size ARF in the world today. It comes packaged with the entire airframe including blades, cyclic servos, tail servo. 3G Flybarless Unit, Governor, Receiver Battery and Voltage Regulator. You are probably asking yourself about now, ok so what do I have to supply to get this helicopter flying? Fuel pump, Engine Starter, Engine Fuel, Receiver, Motor, Pipe and your radio. That’s it! Here are some of the features of this new helicopter:

This is the Align Trex 700 3G Flybarless packaged as Ready To Fly. You may also have this helicopter professional built by HeliHobby, please call us directly for details!

We have taken the new Align Trex 700 3G Flybarless kit and added it into a complete package including everything you will need to get it in the air. It includes the Align 3G Flybarless unit, 3 x Align DS610 Digital MG servos on cyclic, Align DS650 Digital tail servo as well as Align blades, governor, regulator, receiver pack, all the components of the airframe.

In this package you will also receive the DX7 Special Edition transmitter running at 11ms frame rate and 2048 bit resolution paried with the AR7600 DSM2 2048 bit receiver for the ultimate in response. We have included the Align 91H motor with the Black Head because it runs cooler and paired it with the RJX .90 muffler which is still the most power we can get out of this helicopter with the combos we have tried.

You will need a fuel pump, starter and a battery charger as well as some basic tools to operate this r/c model. We recommend the following package: Nitro Starter Package

Everything you need to fuel and start your nitro helicopter all in one convenient package. We have included the Align starter which turns a .90 motor over like child’s play! We also included a hand crank fuel pump, a glow driver with rechargeable battery, the Align 1.5mm - 3.0mm driver set and the Align pitch gauge for up to .90 size helis.. The charger in this package will charge up to a 6 cell lithium polymer battery, NiCd/NiMH, Lead Acid and has a power rating of 75w. This package is intended to be a turnkey solution to starting your nitro, pun intended..