The Lightning Power MCP X Brushless Conversion Speed Controller + Steve Converter
This item will convert the traditional brushed motor on the MCP X to Brushless.
This is an Plug And Go. no soldering needed!
Cause we have a inrunner brushless motor, only a small modification is need to install it on the stock frame.
motor supports and the motor mount itself need to be cut a small piece of each side (photo included).
Will fit perfectly in a modified Micro Heli after market frame.
For best performance please use 75% - 100% Throttle curves at all times when you fly with this conversion.
Capacity is 7A and will handle the needs of the brushless motor for the MCP X.
This is included in the package:
* Lightning Power brushless speed controller + brushed signal converter built in.
* Lightning Power 10,900 brushless inrunner motor.
* Male to Male to connect the speed controller and motor.
* 3 small rubbers to install on the swashplate ball links in case the mCP X will vibrate from the upgrade (cut in half if use in Micro Heli swashplate).
This conversion will upgrade 3D capabilities, lots and lots of power! you will reach 5,500 to 6,000 RPM with this M.O.D.
After some testing we discover that the high head speed might cause the mCP X to vibrate, in this case use the small rubber piece included on the ball linkgs of the swashplate, this will eliminate any vibrates.
*this item can be back-ordered if out of stock.
